GarmaNoor company helps manufacturers of industrial furnaces and dryers by providing gas-burning thermal elements in different dimensions and with different thermal powers. gas heating element type MT is supplied with thermal power of 40, 45 and 50 KW and in some cases it is used with the aim of optimizing the process and reducing electricity consumption and replacing gas.
The thermal element is used for heating industrial processes such as heating ovens and industrial dryers for various applications such as paint curing and production of cut-resistant gloves.
For example, the heating of paint curing tunnel furnaces with traditional methods is usually associated with problems such as the lack of adequate and uniform heat supply, which is due to the escape of hot air from the inlet and outlet openings of the furnace. Many have been solved. Low baking temperature or short residence time in the paint oven will weaken the mechanical and chemical resistance of the paint and make the paint look bad. The paint oven with an approximate time of 25-30 minutes and a temperature of up to 240 degrees centigrade has the ability to bake regularly according to the baking curve of all kinds of powder and liquid paints. The paint curing oven at different temperatures has the ability to dry and remove the solvent from the paint as well as resin polymerization of synthetic colors.
Another example is the heating of drying ovens related to the production of anti-cut gloves, which requires a temperature of about 150 degrees Celsius.
Traditional heating systems for painting furnaces are very inefficient, especially for heavy parts that absorb more heat. By using the heat radiation system, the heat is concentrated on the surface of the piece and enables the paint to be baked with higher quality and lower energy consumption.
